McCormack Industries manufactures a wide variety of lifting jibs to suit most industries and applications. They are specifically designed for material handling and maneuvering loads. They can be manufactured to suit a wide range of wheel loaders and Telehandlers. All jibs are tested and certified to relevant Australian Standards.
The Short Boom Lifting Jib is available with a maximum lift capacity of 5000kg and is available to suit all Telehandlers and Wheel Loaders.
The compact design is light for its strength, meaning only a small weight must subtract from the machines rated lift capacity.
The Long Boom Lifting Jib is better suited for applications where further reach and lift height are required. Again, the Jib is available to suit all models of Telehandler and Wheel Loader.
There are three lifting points along the jib, with a maximum capacity of 5000kg at the base to 1000kg at full reach (approx. 2.4m).
The Extendable Boom Lifting Jib is the most versitile jib in the range. It has the convenience of an enormous 4.2 metre reach, without the inconvenience of a permanent long boom when heavier loads need to be manouvered of the base lift points, in that the boom can be retracted when extra reach is not required.
There are seven lifting points with a maximum capacity of 6000kg fully retracted to 1000kg at full reach.
This jib is available to suit all models of Wheel Loader.
McCormack Industries Forklift Jibs are easily secured by chain to the forklift mast and are available in long boom and short boom variations, with lifting capacities varying from 1000kg to 4000kg.
Features
Forklift Slip-On Jib – Long Boom
Forklift Slip-on Jib – Short Boom
McCormack Industries offers a unique solution to gain extra height from a tractor loader. Depending on the machine, the Extra Lift attachment can gain as much as an extra metre of lift height.
Simply hitch the Front End Loader to the Extra Lift and then hitch the Extra Lift to the final attachment, e.g. Pallet Forks.
The Extra Lift is a perfect tool for hay handling, allowing a front end loader to stack bales higher without inhibiting the use of the machine, because it can be removed when finished.
A common issue when loading fertiliser or seed into an air seeder is having enough lift height to reach over the top of the bin. McCormack Industries manufactures a 1-tonne bag lifter to solve this problem, increasing the lifting height of your tractor loader. This bag lifter can be made to suit any make of tractor loader or telehandler. Depending on the make of machine, the lifting height can be increased by up to 1.5 metres. The four hooks on the upper part of the frame make lifting 1-tonne bags a much safer and more secure practice.