Buckets

Buckets

4in1 Bucket Range
Our 4 in 1 buckets are a high quality multi-purpose product with a range of models to suit all applications. They range from light duty construction for low horsepower tractors to heavier versions for large high horse power tractors. Other models are constructed especially for telehandlers with an extra heavy duty model for large wheel loaders. 4in1 buckets are a versatile tool with a range of features, these include:
        • BUCKET – Use the 4/1 bucket like a GP bucket by keeping the jaws closed and using it to scoop materials
        • GRAB – Open the jaws on approach to the object you wish to pick up, put the bucket over the object and carefully close the bucket and lift. Always be careful not to pull hefty items out of the ground as this will bow and buckle your bucket in the middle.
        • BLADE – Fully open the 4 in 1 bucket and position the bucket so that the rear half is vertical. Now the bucket is ready for use as a standard blade.
        • LEVELLING – Like with the blade option, open the bucket jaws. Crowd the bucket far enough forward that the back cutting edge of the front half of the bucket is touching the ground. Drag the bucket backwards to flatten out the rough spots.
        4in1 Loader Buckets
        Buckets can be fitted to any make and model of front end loader
        They are split into 3 different types based on tractor horse power.
        • Type 1 These buckets feature heavy duty construction suitable for tractor loaders over 90 HP and small Telehandlers. 
        • Type 2 – These buckets are designed for light duty applications on tractor loaders under 90 HP.  
        • Type 3 - These are for the small compact range of tractor loaders under 40HP.
        Some of the standard specs of our 4 in 1 range include:
        • Flat base for easy fill
        • “Light Industrial” quality hydraulic rams
        • Greaseable knockout bushes and replaceable pins
        • Light Duty (LD) and Heavy Duty (HD) bucket options
        • Double wire braided hoses and standard ag breakaways
        Back to Top
        Type 3 4in1 Buckets
        Suited for small compact tractor loaders less than 50 HP
        The Type 3 or compact range of 4in1s are a light but durable range of buckets. Like our bigger buckets, the compact range is Australian made with Australian steel and a great little bucket if you need a 4in1 that won’t weigh you down.
        Bucket Sizes
        Width 1300mm 1500mm 1600mm
        Capacity 0.25m3 0.26m3 0.27m3
        Depth (A) 480mm 560mm 560mm
        Height (B) 440mm 450mm 450mm
        Weight 160kg 185kg 200kg
        Back to Top
        Type 2 4in1 Buckets
        Suited for tractor loaders less than 90 HP
        The lighter duty Type 2 McCormack bucket is an economical but durable 4in1 bucket. Cheaper than the Heavy duty Type 1 model, but ideally suited for tractors under 90HP. Still Australian made with Australian steel but with a more economical design. This bucket is durable and great for general duties around the farm and is built for Australian conditions.
        Bucket Sizes
        Width 1800mm 2100mm
        Capacity 0.50m3 0.52m3
        Depth (A) 660mm 660mm
        Height (B) 560mm 560mm
        Weight 315kg 360kg
        Back to Top
        Type 1 4in1 Buckets
        Suited for tractor loaders above 90 HP and small Telehandlers
        The Type 1 4in1 buckets built by McCormack Industries are number one when it comes to toughness. The heavy duty design and strong construction of the bucket ensures it will stand up to the rigorous demand of general earthmoving work. This class of bucket comes standard with the industrial quality hydraulic rams that are used on all our 4in1’s but it also comes with two extra cutting edges on the front sides of the bucket as depicted in photos.
        Bucket Sizes
        Width 1800mm 2000mm 2200mm 2400mm
        Capacity 0.52m3 0.59m3 0.65m3 0.71m3
        Depth (A) 630mm 630mm 630mm 630mm
        Height (B) 650mm 650mm 650mm 650mm
        Weight 390kg 425kg 510kg 520kg
        Back to Top
        4in1 Telehandler Buckets
        Buckets can be fitted to any make and model of Telehandler 
        McCormack Industries manufactures 4in1 buckets specifically suited to Telehandlers, they range in widths and capacities to suit a wide variety of machines. All pivot points feature replaceable knockout bushes and they incorporate wear plate material on all leading edges. These features make them ideal for earthmoving and general agricultural or construction duties.
        Bolt on Cutting Edges or Bucket teeth can be added as an extra. 
        Back to Top
        4in1 Wheel Loader Buckets
        Buckets can be fitted to any make and model of Wheel Loader 
        Wheel Loader Buckets are predominantly constructed of high tensile plate, with 450 Grade wear strips on all leading edges. They are built tough and durable with all pivot points feature replaceable knockout bushes to stand up to years of use. Bolt on Cutting edges come as standard on the leading edge of the rear assembly as well as the front assembly’s leading edge. Teeth can be added as an optional extra.
        General Purpose Bucket Range
        General Purpose Buckets are ideal for handling gravel, sand and other debris. Made to suit Tractor Loaders, Telehandlers and Wheel Loaders.
        Back to Top
        Front End Loader GP Buckets
        Like all our products made in the Aubigny workshop, General Purpose buckets are made using Australian sourced steel. We also make them with standard side cutting edges and a weld on edge along the front length of the bucket. 
        McCormack Industries buckets are all available with the optional extra of a bolt on cutting edge or teeth. 

        Don’t have a McCormack loader? That’s ok, we can make all our gear suit any loader you have whether it’s quick hitch or manual hook up.
        Bucket Sizes
        Width 1500mm 1800mm 2100mm 2400mm
        Capacity 0.33m3 0.51m3 0.70m3 0.80m3
        Depth 590mm 605mm 650mm 680mm
        Height 585mm 740mm 780mm 780mm
        Weight 160kg 210kg 260kg 305kg
        Back to Top
        Telehandler GP Buckets
        McCormack Industries manufactures general purpose buckets suitable for Telehandlers. These buckets are ideal for handling gravel, sand and other debris. The Telehandler style bucket comes standard with side and front cuttings edges, with optional bolt on edges and teeth available. They feature heavy duty economical construction with a range of sizes to suit all Telehandler sizes. They feature high grade steel construction and front, side and heel wear plates where required. They can be fitted with teeth and bolt on cutting edges.
         
        They come in a range of widths from 1.8m to 2.4m with capacities from 0.5m³ to 1.5m³
        Back to Top
        Wheel Loader GP Buckets
        McCormack Industries manufactures general purpose buckets suitable for wheel loaders. These buckets are ideal for handling gravel, sand and other debris. The Wheel loader style bucket comes standard with a bolt cutting edge and available with teeth. They feature 450 grade wear plate in the front, side and heel of the bucket to increase the buckets life. The wheel loader buckets come in a range of sizes to suit machines from 5 to 20 ton. They come in a range of widths from 1.8m to 3m with capacities from 1m³ to 3m³
        Light Material Bucket Range
        Light Material Buckets are large capacity buckets suited to handling materials like grain, silage, loamy soils, compost and bark chip, etc. Made to suit Tractor Loaders, Telehandlers and Wheel Loaders.
        Back to Top
        Front End Loader LM Buckets
        McCormack Light Material buckets are ideal for front end loader use and are designed especially for any light materials – grain, silage, loamy soils, compost, bark chip etc. Built with the same materials as our General Purpose buckets, these buckets are reliable and strong with a capacity to suit all your needs.

        We make them with standard side cutting edges and a weld on edge along the front length of the bucket. Bolt on edges are available as an extra.
        Don’t have a McCormack loader? That’s ok; we can make all our gear suit any loader you have whether it’s quick hitch or manual hook up. 
        Bucket Sizes
        Width 1800mm 2000mm 2200mm 2400mm
        Capacity 0.80m3 1.00m3 1.12m3 1.20m3
        Depth 760mm 840mm 840mm 840mm
        Height 835mm 900mm 900mm 900mm
        Weight 260kg 310kg 360kg 405kg
        Back to Top
        Telehandler LM Buckets
        McCormack Light Material Telehandler buckets are larger capacity than the Front End Loader equivalents. Similarly, they are designed especially for any light materials – grain, silage, loamy soils, compost, bark chip etc. These buckets feature economical but durable construction to maximise the carrying capacity of the machine.

        We also make them with standard side cutting edges and a weld on edge along the front length of the bucket. Bolt on edges are available as an extra. They come in a variety of widths and capacities with a maximum capacity of 4m³.
        Bucket Sizes
        Width 2400mm 2400mm 2400mm 2400mm 2400mm
        Capacity 2.00m³ 2.50m³ 3.00m³ 3.50m³ 4.00m³
        Depth 900mm 1020mm 1200mm 1300mm 1500mm
        Height 1090mm 1175mm 1280mm 1360mm 1460mm
        Weight 530kg 590kg 800kg 900kg 970kg
        Back to Top
        Wheel Loader LM Buckets
        McCormack Industries manufactures light material buckets for wheel loaders. These buckets are ideal for handling grain, bark chip, silage or manure. These buckets come with standard features including side and front cuttings edges with a bolt on front cutting edge. They feature economical construction to allow for the maximum capacity. These are available in a range of widths and capacities up to 6m³. The wheel loaders buckets come in a range of sizes to suit machines from 5 to 20 ton. They feature high grade steel construction and front, side and heel wear plates where required.
        Overtipping Buckets
        Large capacity buckets that are self pivoting, allowing extra reach and height
        Back to Top
        One of the downfalls of loading light and loose material into high sided trucks is that conventional buckets aren’t able to unload properly or even reach over the side. The Overtipping bucket incorporates a separate frame which effectively allows the bucket to tip from near the front cutting edge. This increases the height which the loader can clear while allowing all the material to be dumped efficiently. They are ideal for loading cotton seed, grain and green waste. They can be made to suit all makes of wheel loader or Telehandler.
        • Heavy duty construction
        • Available in a large range of capacities and widths, up to 3 metres and 6 cubic metres.
        • Ideal for loading grain, cotton seed or green waste
        • Increase efficiency and productivity 
        • Come standard with replaceable bolt on cutting edge
        • Greaseable knockout bushes and replaceable pins
        Rock Buckets
        Open design lets loose dirt fall through while rocks and other debris are collected
        Back to Top
        Front End Loader Rock Buckets
        McCormack Industries make heavy duty buckets that are specifically designed for loading and carting rocks or other debris. These buckets are made from Australian sourced steel with front and side weld on cutting edges. The floor and part of the rear of the bucket are open to allow dirt to flow through. The 12mm ribs and stiffener plates in the design add extra strength and durability. We make these buckets the same widths and capacities as our General Purpose buckets meaning they are very practical. They can be made to suit all loader models and hitches on request.
        Bucket Sizes
        Width 1800mm 2100mm 2400mm
        Capacity 0.51m³ 0.70m³ 0.80m³
        Depth 640mm 640mm 640mm
        Height 740mm 740mm 740mm
        Back to Top
        Wheel Loader Rock Buckets
        For larger operators, a heavy duty Wheel Loader Rock Bucket is also available. These heavier, larger capacity buckets are made with 25mm hardwearing steel ribs as standard, to prolong the life of the bucket. The bucket range also features a replaceable cutting edge and replaceable heel wear plates. Built especially for sorting dirt and small rocks from larger rocks, sticks or concrete among many other applications.
        • Heavy duty construction
        • Available in a large range of capacities and widths
        • Increase efficiency and productivity 
        • Come standard with replaceable bolt on cutting edge
        Skid Steer Bucket Range
        McCormack Industries Manufactures a range of buckets for Skid Steers.
        Back to Top
        4in1 Skid Steer Buckets
        McCormack Industries manufactures a 4in1 bucket specifically suited for use on Skid Steers. The heavy duty design and reinforced construction of the bucket means that it can handle the tough environment and conditions of skid steer work. This class of bucket comes standard with the industrial quality hydraulic rams that are used on all our 4in1’s. The front floor of the bucket is flat to allow for easier filling and is made from high grade steel. Teeth and bolt on cutting edges are also available as an optional extra.
        Back to Top
        Skid Steer LM Buckets
        McCormack Light material skid steer buckets are specifically designed for handling grain, cotton seeds, manure or compost. They feature a long flat floor for easy filling and low height for cab door clearance and visibility. They come standard with side and front cutting edges and are available with bolt on cutting edges.
        Skid Steer LM Buckets
        McCormack Light material skid steer buckets are specifically designed for handling grain, cotton seeds, manure or compost. They feature a long flat floor for easy filling and low height for cab door clearance and visibility. They come standard with side and front cutting edges and are available with bolt on cutting edges.
        Back to Top
        Share by: